What is X-L PIPE HEATING SYSTEM?
It is an innovative heating system that uses heat and increased pressure generated by Heat Transfer Medium by heating the sealed X-L PIPE without boiler, in which water or other fluid is heated and water circulation motor which pumps water circulated in the PIPE.
It is the innovative high energy efficient floor heating system that has no heat loss and achieves 30°C rise effect in temperature. Our patented pressure absorbing device absorbs too much internal pressure and also the heat transfer medium and carbon tissue absorbs the electromagnetic waves for a healthy life.
Nucleate Boiling phenomenon: The process of forming steam bubbles within liquid in micro cavities adjacent to the wall if the wall temperature at the heat transfer surface rises above the saturation temperature while the bulk of the liquid is sub cooled. The bubbles grow until they reach some critical size, at which point they separate from the wall and are carried into the main fluid stream.
Benefits of Heating X-L Pipe System
- Economic
-No heat loss
-Accumulates of heat
-HIgh efficiency (Low electric power consumption)
-Low installation expenses
- Safety
-Water leakage prevention
-Non electromagnetic waves
-Clean energy
- Functional
-Traditional floor heat
-Sectional heat / Whole floor heat
-Well-being
- Durable
-Cold lead installation and safety value for over pressure
-Long lasting
-Low temperature resistant
- Easy & Convenient
-No space for boiler
-Good customer service(Warranty)
-Easy to use
-Easy heating system change(Electric X-L PIPE)
- Various way
-Accommodations, Schools, Vavation facilities
-Hospital, Post-delivery Care Center, Church
-REstaurant, Green house, Swimming pool, Factory
CONDITIONS OF ELECTRIC X-L PIPE
Pressure absorbing device:It absorbs the internal pressure caused the Nucleate Boiling. Double Coated Electric Wires:Since the conductor and the electric wire processing affect on product life and its function, make sure to read the followings.
- Conductor : 7 Strained Nickel - Chrome Coil
- The First Coating : Silicon Rubber coating that can stand very high temperature (150ºC) and has excellent insulating quality.
- The Second Coating : Heat resistant Teflon rubber coating that is water resistant and chemical resistant.
(Temperature resistance : 200°C)
Heat Conducing Medium: They should not freeze at twenty degrees below zero.
Hearmless to Human Body: Electromagnetic waves are absorbed by itself.
Cable: Cable should not exceed 20W/m.(According to Clause 5, Article 225 of Electric Installation Regulations. "The temperature of Electric wires should not exceed 80°C" and/or "Internal Temperature of X-L should not exceed 80°C")
Specifications of Heating X-L PIPE
Model No.
|
EP-010
|
EP-015
|
EP-020
|
EP-025
|
EP-030
|
EP-040
|
EP-050
|
EP-060
|
Dimension
|
14mx15Ø
|
21mx15Ø
|
28mx15Ø
|
35mx15Ø
|
42mx15Ø
|
56mx15Ø
|
70mx15Ø
|
84mx15Ø
|
Power input
|
40W/m
|
Electric
Power
Consumption
(W/h)
|
560
|
840
|
1120
|
1400
|
1680
|
2240
|
2800
|
3360
|
Caloric Value
(kcal/h)
|
481.6
|
722.4
|
963.2
|
1204
|
1444.8
|
1926.4
|
2408
|
2889.6
|
Heating Capacity
(m2)
|
3.3
|
4.95
|
6.6
|
8.25
|
9.9
|
13.2
|
16.5
|
19.8
|
Avr. Power
Consumption
|
76wh/m2
|
Construction cross-section
Information on subsidiary materials
|
|
|
Wire mesh |
Insulation |
Check box |
Installation Process